Search  
Thursday, July 29, 2010 ..:: Forums ::.. Register  Login
Site Navigation

 Quick Links Minimize
      

 Sponsors Minimize
      

 Power Trac Forums Minimize
Forums > Modifications & Improvements > Mods to Implements & Attachments
Subject: Adding a deflector to rear of 48" brush cutter

You are not authorized to post a reply.   
Author Messages
KentT

Since: 5/21/2006
Posts:79
Massachusetts & Tennessee
07/05/2007 2:05 PM Alert 

I just posted pictures of the deflector I added to my rotary brush cutter in the Photo Gallery:  My total expense was the cost of 5/16" bolts, fender washers and nylock nuts... everything else was scrounged for free.

http://mypowertrac.com/PhotoGalleries/ModsCustomBuilts/tabid/71/mid/384/GalleryID/29/Default.aspx
Kent Thomas
Reluctant webmaster...
You are not authorized to post a reply.
Forums > Modifications & Improvements > Mods to Implements & Attachments > Adding a deflector to rear of 48" brush cutter


ActiveForums 3.6
This is a restricted site. Registered users have full access but visitors may only browse limited portions of the site. All information presented on this site should be considered the result of an unofficial, unmoderated public forum. We (the Webmaster, advertisers or sponsors) assume NO RESPONSIBILITY for the accuracy or usability of any information here. USE AT YOUR OWN RISK!
      

 Sponsors Minimize


      

Copyright 2006 by Simple trACtors, LLC   Terms Of Use  Privacy Statement
DotNetNuke® is copyright 2002-2010 by Perpetual Motion Interactive Systems Inc.